Organic chemistry

Evaporator with a vacuum pump

Evaporator with a vacuum pump Heidolph Instruments GmbH can be used for routine distillation.


  • Two independent safety circuits prevent the heating bath from overheating.
  • In case of a power cut, the evaporator raises the distillation flask above the heating bath preventing potential distillate solution damage and danger.
  • Making all the connection wires in the heating bath to avoid short circuit and systematic corrosion. Highest safety class IP 67.
  • Removable control panel located near the base, allows it to be moved outside the danger zone of the distillation flask
  • To avoid temperature overshoots and the associated possibility of potential thermal damage to the distilled substances, the maximum bath shut-off temperature can be individually specified on digital models.
    Simplicity of use
  • The height and angle of the distillation flask can be easily adjusted from 20° to 80°
  • Distillation flask holder is connected by a ring to the vapour coupler for easy insertion/removal of the distillation flask
  • The flask ejection function of the vapour coupler allows the immediate removal of a seized distillation flask in a safe way for the user
  • The heating bath, which extends to 200 mm, enables operation with flasks up to 5 L.

Technical data of the device (from the manufacturer):

Lift: Motor lift
Height adjustment speed: 30 mm/s
Height adjustment: 155 mm
Rotation speed: 10-280 rpm
Rotation speed indicator: 3.5" LCD display
Drive: brushless DC motor with electronic speed control
Heating capacity: 1,300 W
Temp. range heating bath: 20–210 °C
Overheat protection bath: cut-off at 5 °C over set temperature via separate Pt 1000
Bath temperature setting: 3.5" LCD display
Heating bath temperature control: electronic /digital
Material heating bath: stainless steel AISI 316 L
Diameter heating bath: 255 mm
Volume heating bath: 4.5 l
Max. size evaporating flask: 5 l
Supply power: 1.400 W
Weight w/o glassware assembly: 16 kg
Condensing surface: 1 ,400 cm2
Permissible ambient conditions: 5 –31°C at 80 % rel. humidity, 32–40°C decreasing linearly up to max. 50 % rel. humidity

Thermo Dewars Cryogenic Transfer Vessels

Thermo Scientific Thermo Series Liquid Nitrogen Transfer Vessel is designed for storing and dispensing small amounts of liquid nitrogen. Our Thermo device capacity is 32 liters.
Cryogenic Transfer Vessels:

  • Designed to bring liquid nitrogen to other cryo vessels
  • Lightweight aluminum dewars assure low-static evaporation rates
  • Can be fitted with self-pressurized withdrawal accessory devices to easily dispense LN2 without pouring

Technical data of the device (from the manufacturer):

Brand: Thermo Scientific
Product Series: Transfer Vessel
LN2 Capacity: 32 L
Neck Diameter: 2.5 in
Static Evaporation Rate: 0.22 Liters / Day
Static Holding Time: 145 Days

Digital osciloscope Hantek MPO6104D

The MPO6104D is a Hantek four-channel digital oscilloscope with a built-in two-channel function generator and 16-channel logic analyzer. With four analog input channels CH1 CH2 CH3 CH4, the oscilloscope provides four independent waveforms on a single screen. The bandwidth of each input channel is 100MHz. Additionally, a built-in dual function generator allows to generate periodic or user-defined electrical signals. Another distinguishing feature of the MPO6004D oscilloscope series is the extended trigger section, which also allows the use of signals from digital serial buses: SPI, CAN, I2C... The oscilloscope has built-in serial bus decoders as standard. The MPO6104D four-channel digital oscilloscope is more comfortable to work with thanks to its large 7-inch TFT touchscreen with 800x480 resolution and 16M color palette.

Technical data of the device (from the manufacturer):

Autoset - automatic selection of parameters of voltage sensitivity, time base, and trigger type, so that the display shows a stable periodic electric waveform (Autoscale function)
Automatic measurements: The MPO6104D oscilloscope is equipped with a function that automatically measures 32 parameters characterizing an electrical waveform: e.g. voltage, frequency, fill factor
Cursor measurements: using cursors it is possible to measure voltage parameters in the vertical axis and time parameters in the horizontal axis in a manual way (by placing a pair of cursors in a chosen position) or in an automatic way (track)
USB Device - allows you to connect a memory stick to the socket on the front panel of the oscilloscope and directly record or read waveforms. You can also save data on your computer.
USB Host - communication with a PC. Possibility of sending data and presenting it in the Windows software. From the software level we have the possibility to control the computer settings.
Pass/Fail function - popularly known as "masks" allows to monitor changes in the observed signal. It consists in defining a mask around the reference signal. In the case of detecting changes in the reference signal at the output we get the output signal Pass (good) or Fail (bad)
Recording, archiving of observed waveforms for further processing in spreadsheets or as a graphic file for reports or presentations. Possibilities of saving data from the oscilloscope in internal memory or an external USB flash drive:
► saving settings in *.SET format. A maximum of 9 settings files (from No. 1 to No. 9) can be stored in the internal memory. The stored settings can be recalled.
► waveform record in *.LWF format
► saving the reference waveform *.REF. On recall, the reference waveform will be displayed directly on the oscilloscope screen.
► save waveform in *.CSV format to a spreadsheet. Saved files contain waveform data of displayed analog channels and main settings, oscilloscope information. Restoring CSV file is not supported.
► Save waveforms in *.BMP format. An image file with the entire display interface of the oscilloscope visible. Restoring a saved image file to the oscilloscope display is not supported.
Built-in serial bus decoders RS-232 UART, CAN, SPI, I2C, LIN,
built-in DDS function generator - separate 2 BNC outputs. Function generator works independently from oscilloscope (simultaneously).
built-in 16-channel logic analyzer - separate 16 digital inputs for logic state analysis

Vacuum sprayer KIFURNACE 0-100mA

KF-1100X is a single target Compact Magnetron Plasma Sputtering Coater with Double Step Rotary Vane Vacuum Pump. Developed in our team modification of machine enables use of double target rotary header for sputtering of two different metals on the single substrate. Machine operates at high vacuum with external cooling system

Technical data of the device (from the manufacturer):

Type: Coating Spray Gun
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump
Coating: Vacuum Coating
Voltage: 110V/220V/380V
Power: 2kW
Dimension(L*W*H): L360mm * W300mm * H380mm
Targret: Gold
Target diameter: 50mm

Target thickness: 0.1mm
Host Specifications: L360mm * W300mm * H380mm
Vacuum sample chamber: D160*H120mm
Sputtering area: Dia.50mm
Vacuum indicator range: ≤ 4X10-2 mbar
Mechanical Pump: 2 L/S
Timer: 360S
After-sales Service Provided: Free spare parts, Video technical support, Online support
After Warranty Service: Video technical support, Online support, Spare parts

Advanced melting point meter SMP30

Enables fast and accurate determination of melting points, the SMP30 can measure three samples simultaneously in an optimized heating block, up to a maximum temperature of 400 ° C.

Technical data of the device (from the manufacturer):

Number of samples: 3
Temperature range: From room temperaturę to 400°C
Temperature resolution: 0.1°C
Temperature accuracy: ± 0.5 with 50°C, ± 1.0 with 100°C, ± 2.5 with 360°C
Display: 40 x 4 LCD
Ramp speed: 0.5-10°C with step 0.1°C
Temperature sensor: PT1000 Platinum resistor
Cool down time: 350-50°C ~ 10 min
Heating time: 50-350°C ~ 6 min
Power: 120V,230V, 50Hz
Temperature units: °C
Dimensions ( wys. x gł.  x szer.): 325 x 200 x 170mm
Net weight: 3.6 kg

  • Maximum temperature up to 400 ° C
  • Patented head with HUD display
  • Integrated cooling from 350 ° C to 50 ° C in 10 minutes
  • Large, easy-to-read user-friendly interface
  • Possibility to order with IQ / OQ qualification

Homogenizer PT 2500 E

The PT 2500 E homogenizer can be used to homogenize volumes from 0.05 to 2500 ml. It is equipped with an electronic control system that constantly monitors the speed and automatically adjusts it, keeping it constant with changes in viscosity. Various styles and diameters of dispersing heads are available for optimal particle size reduction in this drive. Many head types from 3mm to 25mm are available.

Technical data of the device (from the manufacturer):

Type: PT2500 E
volume H₂O (ml): 0,05 - 2500
Speed range (obr./min): 500 - 30000
Engine power (W): 500
Display: LED
Noise level (dB (A)): 66 przy 25000 min-1
75 przy 30000 min-1
Dimensions - width. x head x height. (mm): 76×157×236
Weight (kg): 1,8

Biotage® Selekt Flash Purification System


Selekt is a lean and compact automated flash system with two column channels, so you can run two separation in one instrument. You can also easily switch between normal and reverse phase, with the system automatically flushing the solvent lines for you.

Selekt has the smallest footprint among all the commercially available systems, but still has the higher pressure and flow rate, so equilibration and separation can be run in a flash. Sfär columns are designed to tolerate the high pressure and their quality means less re-runs, higher efficiency.

Biotage Selekt is distinguished by:

  • Practical and easy-to-use software (GUI)
  • Large touch screen display
  • Small footprint, smallest chromatograph footprint on the market < 14"
  • CE marked flash columns with QR code
  • Ability to scan the QR code to quickly enter all optimized parameters of the finished method, including sample size, flow rate
  • Possibility to work with flows of up to 300ml/min
  • Automatic tray detection for purified fractions (RFID-Radio Frequency Identification)
  • High sensitivity UV-VIS detector (PDA) with baseline correction and selection of any detection wavelength.

Technical data of the device (from the manufacturer):

Column channels: Two
Flow Rate Range: 1-300 mL/min.
Pressure Range: 0 – 30 bar
Solvent supply: A maximum of 4x 5 liter rservoirs
Max numer of fractions: 144 fractions with no rack change
Internal detector wavelength: 198 – 810 nm (UV-Vis) Amplitude range: 0 to 6400 mAU (Absorbance Units)
Weight: 23 kg
Dimensions: Footprint: (W x D) 335 mm x 393 mm (13.2” x 15.5”) Height: 545 mm (21.5”)
Interfaces: 15.0” touch screen